a56 single slot connector for pc card type iii ic7 series 4.vibration 5. humidity (steady state) 7. durability (insertion/ withdrawal) 8. resistance to soldering heat 6.temperature cycle features 1. pc card standard compliant: type i, type ii and type iii cards are covered. terminals for grounding are provided. 2. space saving and lightweight connector height is minimized to 5.4mm, and weight is 12.5g. 3. eject mechanism hirose's unique ejection mechanism provides an higher degree of card ejection over existing products. product specifications 500 v dc 500 v ac / 1 minute 1ma frequency: 10 to 2000 hz, full amplitude of 1.52 mm or acceleration of 147m/s 2 , 4 hours in each of the 3 directions 96 hours at temperature of 40 ? and humidity of 90% to 95% temperature: -55 ? +15 ? to +35 ? +85 ? +15 ? to +35 ? time: 30 5 max. 30 5 max. (minutes) 5 cycles 10000 cycles at 400 to 600 cycles per hous manual soldering: 300 ? for 3 seconds 1000 m ohms min. no flashover or insulation breakdown 40 m ohms max. (initial value) no electrical discontinuity of 100ns or more insulation resistance: 100 m ohms min. no damage, cracks, or parts looseness contact resistance: 20 m ohms max. from initial value no deformation of the insulator parts affecting performance 1. insulation resistance 2. withstanding voltage 3.contact resistance rating current rating 0.5 a voltage rating 125v ac operating temperature range -55 ? to +85 ? (note 1) operating humidity range relative humidity 95% max. (no condensation) storage temperature range -40 ? to +70 ? (note 2) storage humidity range relative humidity 40% to 70% item specification conditions note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation. material part insulator contact material connector eject button connector eject metal fitting locking pins nuts terminals for grounding finish pbt pa brass phosphor bronze stainless steel phosphor bronze steel color: black color: black contact area: gold plating lead area: solder plating gold plating ---------- solder plating nickel plating remarks ul94v-0 ul94v-0 ---------- ---------- ---------- ---------- ---------- ----------
series name : ic7 number of contacts : 68 board mounting type pd : standard pdr : reverse contact pitch : 1.27mm board mounting type ds : right angle dip ejector type no letter : without eject button ejr : right eject button ejl : left eject button a57 ordering information ic7 - 68 pdr - 1.27 ds - ejr 1 2 6 4 3 5 1 2 3 4 5 6
a58 b examples of connector mounting standard type reverse type ic7-68pd-1.27ds-ejl ic7-68pd-1.27ds-ejr ic7-68pdr-1.27ds-ejl ic7-68pdr-1.27ds-ejr card tope surface card tope surface card tope surface card tope surface card tope surface eject button eject button eject button eject button card tope surface card tope surface card tope surface
a59 single slot connector right eject button standard type, reverse type standard ic7-68pd-1.27ds-ejr cl640-0401-0 reverse ic7-68pdr-1.27ds-ejr cl640-0402-2 contact length contact no. 5.0 0 0.1 3.5 0 0.1 4.25 0.1 1, 17, 34, 35, 51, 68 36, 67 other than above table 1 4 1 b pcb mounting pattern b example of screw fastening (recommendation) note the contacts length is indicated in table 1. the applicable range of indicated dimensions (54.2 , 3.5 ) are taken as 10mm from the bottom. the terminal for grounding should be securely fasted from the bottom surface of the board using a screw (m2 0.4), flat washer and lock washer. pay attention to the contact no. since the reverse type is marked "r". see the numbers in parentheses ( ) for the contact no . of the reverse type. the guide groove dimensions of the reverse type are left-right reversed. 1 2 3 4 5 +0.1 - 0.05 +0.1 - 0.05
a60 single slot connector left eject button standard type, reverse type standard ic7-68pd-1.27ds-ejl cl640-0403-5 reverse ic7-68pdr-1.27ds-ejl cl640-0404-8 contact length contact no. 5.0 0 0.1 3.5 0 0.1 4.25 0.1 1, 17, 34, 35, 51, 68 36, 67 other than above table 1 4 1 b pcb mounting pattern b example of screw fastening (recommendation) note the contacts length is indicated in table 1. the applicable range of indicated dimensions (54.2 , 3.5 ) are taken as 10mm from the bottom. the terminal for grounding should be securely fasted from the bottom surface of the board using a screw (m2 0.4), flat washer and lock washer. pay attention to the contact no. since the reverse type is marked "r". see the numbers in parentheses ( ) for the contact no . of the reverse type. the guide groove dimensions of the reverse type are left-right reversed. 1 2 3 4 5 +0.1 - 0.05 +0.1 - 0.05
a61 single slot connector ic7-68pd-1.27ds cl640-0405-0 contact length contact no. 5.0 0 0.1 3.5 0 0.1 4.25 0.1 1, 17, 34, 35, 51, 68 36, 67 other than above table 1 1 b pcb mounting pattern b example of screw fastening (recommendation) note the contacts length is indicated in table 1. the applicable range of indicated dimensions (54.2 , 3.5 ) are taken as 10mm from the bottom. the terminal for grounding should be securely fasted from the bottom surface of the board using a screw (m2 0.4), flat washer and lock washer. 1 2 3 +0.1 - 0.05 +0.1 - 0.05 without eject button standard type
|
